Polyurea Floor Coatings in Paradise Valley, AZ
- Impact tolerant
- Flexible
- Fast set
Polyurea is the base coat we reach for when a floor will be worked hard. It sets fast, bonds well to properly ground concrete and has a bit of flex, so it handles dropped tools, rolling jacks and the expansion and contraction of a slab that heats up every afternoon.
We use it in workshops, busy multi-car garages and anywhere toughness matters more than anything else.
Ask for a callback
Free floor visit in Paradise Valley and nearby
We call back to talk through the floor and set a time to see it in person.
What you get
Why a flexible base matters.
Concrete moves. It expands in heat, shrinks as it cools and shifts slightly over time. A rigid coating can crack or chip where the stress concentrates. Polyurea has more elongation than epoxy, so it can move a little with the slab and absorb impact rather than chipping.
In most of our polyurea systems, the polyurea forms the base and body, often with flake, and a polyaspartic clear goes on top for UV stability and abrasion resistance.
Typical build for this system, top to bottom. Select a layer.
Why choose it
What polyurea brings to a floor.
Handles impact
Dropped tools and parts are less likely to chip the floor.
Moves with the slab
Flexibility helps the coating ride out temperature swings.
Sets quickly
Fast cure means a shorter install and quicker return to use.
Resists chemicals
Good resistance to oils, fuels and common shop fluids.
Options
How we use polyurea.
We'll talk through both at the visit and bring samples so you can see them in your own light.
Polyurea base with flake
A polyurea base with full-broadcast flake and a polyaspartic clear. It's a tough, good-looking garage or workshop floor with a fast turnaround.
Solid-color shop floor
Polyurea in a solid color with a clear or pigmented top, sometimes with marked work zones. It suits fabrication benches, detailing and storage rooms.
Paradise Valley notes
Slabs that heat up every day.
A garage slab in Paradise Valley can swing a long way in temperature between a summer afternoon and the following dawn. Over years that movement stresses rigid coatings. Polyurea's flexibility is a good match for it. Because it sets quickly, especially on warm concrete, we plan batch sizes and start times carefully through the summer.
- Daily heat cycles
- Workshops
- Fast-set planning
- Polyaspartic clear
Install day
How a polyurea floor goes in.
Polyurea needs an open, clean concrete profile, so grinding is thorough. Cracks are filled and ground flush. The base goes down in sections, flake is broadcast if chosen, and the floor is scraped and vacuumed before the clear.
Many garages and shops are finished in a day or two. Your cure sheet gives dates for foot traffic, equipment and vehicles.
Pricing
What goes into the price.
Polyurea is a premium material and needs careful installation. These are the main factors.
- AreaLarger floors need more crew to work within the set time.
- PrepThorough grinding is required for a reliable bond.
- FinishFlake, solid color and markings each change material and labor.
- TopcoatA polyaspartic clear adds UV stability and another layer.
Afterward
Keeping it in shape.
Sweep regularly and mop with a neutral cleaner. In a workshop, use a degreaser approved for coated floors on oil spots and rinse after. Put mats under welding areas, since hot slag can mark any coating.
Where we work
Where we install this system.
We install polyurea systems in Paradise Valley, Scottsdale, Phoenix, Arcadia and Tempe. Ask if you're nearby.
- Paradise Valley
- Scottsdale
- Phoenix
- Arcadia
- Tempe
Questions
Polyurea Floor Coatings: quick answers.
Anything else on your mind? Add it to your request and we will answer when we call.
Send your questionIs polyurea the same as polyaspartic?
They're related. Polyaspartic is a type of polyurea with a slower, more workable reaction. We often use polyurea as a base and polyaspartic as the clear.
Is it stronger than epoxy?
It's more flexible and impact-tolerant. Epoxy is more rigid. Which is better depends on the floor.
Can it be installed in summer?
Yes, with careful timing. It sets faster on a hot slab, so we work early and in smaller batches.
Does polyurea make sense in a home workshop?
It's one of the best choices for workshops because of its impact and chemical resistance.
Will it hide cracks?
Filled cracks are hidden. Its flexibility helps with minor movement, but active cracks can still show over time.
Does it need a topcoat?
We usually add a polyaspartic clear for UV stability and abrasion resistance.
Photos
Coatings, up close.
Chip, gloss, metallic, outdoor and install shots to help you picture the options. Select a photo to see it larger.
Keep comparing
Systems that pair with this one.
These are the coatings people most often weigh against polyurea floor coatings, or combine with it on the same property.
Free floor visit
Let's look at your concrete.
Send a few details and we'll call to book a visit. It helps to include your street or cross streets, the rough size of the space, anything you've noticed about the slab (cracks, stains, old paint or sealer) and the look you have in mind.
Request a floor visit
We'll call you back to set up a time.